- 意大利Chemitec
- 意大利賽高SEKO計量泵
- 意大利SEKO儀器儀表
- 意大利SEKO氣動隔膜泵
- FLOWLINE液位計
- 瑞士梅特勒mettler
- 英國Williamson蠕動泵
- E+H
- 德國LUTZ魯茨
- 美國G+F儀表閥門控制器
- 法國（KIMO)凱茂環境測量及...
- 美國FTI插桶泵
- 進口氣動隔膜泵
- 易威奇計量泵
- 米頓羅計量泵
- 普羅名特計量泵
- 帕斯菲達計量泵
- 上泰儀器儀表
- 哈納儀器儀表
- 羅斯蒙特儀表
- Hamilton 漢密爾頓
**考慮概述
? 操作化學計量泵或在其附近工:作時務必穿戴防護服，包括手套和護目鏡。
? 補充化學溶液時定期檢查管道有無破裂或老化，需要時更換。（檢查管道時一定要穿戴防護 服和護目鏡。）
? 如果計量泵受陽光」直射，則應使用防紫外線管道。
? 遵守隨化學藥品提供的化學品制造商的說明和警告信息。用戶有責任確定化學藥品與化學計 量泵的兼容性。
? 妥善保管化學藥品和計量泵，防止兒童和寵物接觸。
? 確認計量泵銘牌.上的電壓與安裝現場的電壓：致
? 不要從電線上:割下插頭或接地片。請向持證電工咨詢正確的安裝方法。
? 泵不可用于處理易燃液體。
PULSAtron Series E Plus Metering Pump
504 GPD @ 20 PSI, 230 VAC4-20 mA Input with Dual Manual Control and Stop Function Input
Stroke frequency control via 4-20 mA signal input, manual stroke length control. Stroke frequency is manually adjustable when in local control. Includes stop function input.
General Description
Pulsafeeder PULSAtron Series E Plus chemical metering pumps are positive displacement, diaphragm type pumps. Output volume is adjustable while pumps are in operation from zero to maximum capacity. The PULSAtron Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset. The Series E Plus guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.
Pump Controls
Adjustment is by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are located opposite the liquid handling end. Automatic control via 4-20mA DC and stop function inputs. Auto-Off-Manual switch.
Drive Assembly
The pump drive is totally enclosed with no exposed moving parts. Electronics are housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Average electrical power consumption is 130 Watts.
Materials of Construction
See Specifications tab. Chemical metering pump housing shall be of chemically resistant PBT thermoplastic. All exposed fasteners are stainless steel. Valve seat and seal ring are renewable by replacing the cartridge valve assembly.
Pulsafeeder PULSAtron Series E Plus Chemical Metering Pump - Key Features
- Manual Control by on-line adjustable stroke rate and stroke length.
- Highly Reliable timing circuit.
- Circuit Protection against voltage and current upsets.
- Panel Mounted Fuse.
- Solenoid Protection by thermal overload with auto-reset.
- Water Resistant, for outdoor and indoor applications.
- Indicator Lights, panel mounted.
- Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
- Few Moving Parts and Wall Mountable.
- Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
- Reliable metering performance.
- Rated "hot" for continuous duty.
- Leak-free, sealless, liquid end.
Includes:
A weighted foot valve/strainer assembly, a 1/2" NPT male injection fitting/back pressure check valve assembly, 4' suction tubing, 8' discharge tubing and Owners Manual
